Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #89

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Final Thoughts
[* icon_note] That's it! Your D300VS is assembled and all systems are checked out and operational. You are ready to make your first print. If you are ready to do that now, proceed to the next step, otherwise, turncan turn off theyour hot end heater.
[*
heater and read one of the ''First Print'' guides listed below.
[*
icon_caution] '''NEVER''' leave your printer unattended when the hot end and bed heaters are on. This also means that you should ++always++ be present when you are printing.
[* red] We recommend positioning your D300VS as shown in the photo with the '''X''' tower to the left, '''Y''' to the right and '''Z''' directly in back. This orientation makes it easy to describe when asking for help.
[* icon_note] Next Steps...
[* red] If you plan to print PLA filament for your first print, please read the ''First PLA Print'' guide.
[* red] If you plan to print ABS filament for your first print, please read the ''First ABS Print'' guide.
[* icon_note] That's it! Your D300VS is assembled and all systems are checked out and operational. You are ready to make your first print. If you are ready to do that now, proceed to the next step, otherwise, turncan turn off theyour hot end heater.
[*
heater and read one of the ''First Print'' guides listed below.
[*
icon_caution] '''NEVER''' leave your printer unattended when the hot end and bed heaters are on. This also means that you should ++always++ be present when you are printing.
[* red] We recommend positioning your D300VS as shown in the photo with the '''X''' tower to the left, '''Y''' to the right and '''Z''' directly in back. This orientation makes it easy to describe when asking for help.
[* icon_note] Next Steps...
[* red] If you plan to print PLA filament for your first print, please read the ''First PLA Print'' guide.
[* red] If you plan to print ABS filament for your first print, please read the ''First ABS Print'' guide.

Image 1

Old Version

New Version